LIFE INSURANCE FOR YOUR PAINT.
Beadlock Pro ceramic paint coating creates a hard-sacrificial barrier which shields your paint from the abuse coming from the sun and other harsh elements.
How does it work? Beadlock Pro contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass its strength and hardness. This integrated SiO2 technology makes this product far more durable and hydrophobic than any wax or sealant.
This easy-to-apply coating is specifically designed to protect your paint from the unique conditions it sees both on and off-road. Whether you simply cruise the pavement or get down in the dirt Beadlock Pro ceramic paint coating can take the abuse.
Product may be used on single-stage paint, gel coat, and clear coated paint surfaces.
Also available in a 30ml kit.
Purchase a Beadlock Pro sticker for your car door here!
How you wash your vehicle is the most important part of maintaining your ceramic coating. We have created a diagram along with a maintenance schedule to keep your coating looking it's best!
Prep: Decontaminate the paint surface using Smooth Move paint decontaminater followed by claying the surface with a clay bar and Shine Mist clay lube. Polish the paint to reduce any surface defects and create maximum gloss. Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Apply: Shake Beadlock Pro well. Apply directly onto the applicator pad and spread product evenly onto the surface. Product will have an “oil slick/rainbow” look to it as it begins to dry. This effect should begin within seconds. Give it 45-60 seconds to set up and then remove using a clean microfiber towel. Using an additional towel, lightly wipe over the area again to ensure product is even and level on the surface. Once you have wiped with the second towel the coating will begin to “set-up”. Do not go back into an area minutes later and re-wipe or you could cause streaking.
Proper washing method found here
Ceramic coating maintenance schedule found here
How do you know it’s ready to be removed? Perform a test spot with your microfiber towel. The coating will have some slight resistance when you wipe. This slight resistance lets you know it’s ready for removal. If you have difficulty removing the product, you waited too long.
BEADLOCK creates a hard sacrificial barrier on your wheels and suspension which shields the abuse coming from brake dust, dirt and UV rays.
BEADLOCK contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass strength and hardness, but unlike glass we have blended in a proprietary formulation of elastic polymers, which allow the microscopic surface to flex. With this blended SiO2 chemistry BEADLOCK provides a far more durable and hydrophobic layer than any wax or sealant because it cures as a hardened layer of protection while maintaining the ability to absorb impacts and flex with the surface it's applied to.
This easy-to-apply coating is specifically designed to protect your wheels and suspension components from the unique conditions they see both on and off-road. Whether you simply cruise the pavement or get down in the dirt BEADLOCK coating can take the abuse. Safe for all finishes including raw metals, chrome, powder coat, anodized and painted surfaces.
Method wheel coated with BEADLOCK
Radius Arm coated with BEADLOCK
After BEADLOCK has been applied to the surface there's really no need to use our Cool Guy wheel cleaner unless you have neglected the wheel for a few weeks and the brake dust has built up. Make up a bucket of our SHIFT soap and water to clean the coated surfaces. Always use a soft wash mitt to ensure safe cleaning.
After each cleaning, apply PUNCH-IT synergy spray to maintain the layer of BEADLOCK. This keep the coated surface slick and hydrophobic.
Clean the surface thoroughly with Throw Back paint cleanser. Shake BEADLOCK well. Spray directly on the surface you want to protect OR you can spray directly onto the applicator pad. Spread product using the coating applicator pad. Product will begin to "rainbow" within seconds. Give it 45-60 seconds to set up and remove using a clean microfiber towel. Use an additional towel or flip the included towel inside out to ensure product is even on the surface.
FEYNLAB Pure Wash is a deep clean wash, with no fillers or Waxes. It leaves the surface perfectly clean, perfect for Ceramic coated cars, or in preparation for an application of detailer, a sealant, a wax, or even a coating.
Hit Man is a ruthless sanitary cleaner that attacks grimy culprits and cuts their life span short.
This general purpose, industrial grade cleaning spray contains tough agents which hunt down surface intruders that threaten the surfaces you care about most.
The purpose of Benzalkonium chloride (BAK) is a common preservative used in ophthalmic medications and is the active ingredient in some skin disinfectants and hand sanitizers. BAK is known to be effective in killing bacteria and enveloped viruses. However, its activity against non-enveloped viruses is unknown.
Perhaps one of the few encouraging aspects of the COVID-19 outbreak is that the virus is enveloped. Enveloped viruses are the least resistant to inactivation by disinfection. The structure of these viruses includes a lipid envelope, which is easily compromised by most disinfectants. Once the lipid envelope is damaged, the integrity of the virus is compromised, thereby neutralizing its capacity to infect.
Clean DOOR JAMS, WHEEL WELLS and reach into corners easier than ever. It’s 16” long with a plastic handle and a 4” dome shaped head full of nylon and nylex memory bristles.
A must have and great edition to any wash bucket! These brushes are built to last and have been in use in our shop for years.
$ 19.99 $ 23.00
Specially formulated for Matte/Satin finishes.
Croftgate USA's Wrap Care After Care JP Series perfectly cleans and protects car wraps, keeping them looking brand new for the life of the install and it's an environmentally responsible product, which I feel is very important for the workplace.
When your trim is extremely faded and beyond reconditioning, you need a product that will actually restore color.
Trim Paint Black is a water-based paint for your exterior black trim. This product is not a “quick fix” trim gel or dressing, it is an actual paint designed to work automotive trim. When applied, Trim Paint Black soaks into the top layer of dead trim and restores its rich color. You will be left with a strong healthy layer of plastic and paint which guarantees you fresh-looking durable results.
HDO Pads - Designed for long throw polishers specifically, the heavy duty orbital (HDO) line was created to offer more durable and performance enhancing characteristics. The dual layer design allows these pads to capture all the benefits that come with not only a tapered pad, like anti-roll and backing plate protection, but the benefits of even compression like an exact fit pad. It features the benefits of a thin pad, such as increased power and reduced pad motion, while still retaining the proper weight and balance for proper rotation.
Prevents pad rolling & provides great pad rotation.
CENTER VENTILATED COOLING CHANNEL
Dissipates heat away from the center of pad, reducing temperature, increasing durability.
DUAL LAYER DESIGN
Dual layers reduce heat transfer & lateral movement for less foam fatigue.
HDO® PADS AGGRESSION CHART
Each bar color coordinates with the applicable pad color.
Recommended Tools: Long Throw DA, Mini Long Throw
Microfiber Pads - With years of testing, a complete line of 3 microfiber pads were created to tackle any job with a DA polisher. Using specific blends of microfiber and special bonding materials, we created these pads to have durability and longevity that is tough to compete with. Each pad offers its own unique blend of microfiber, paired with the appropriate foam interface to suite each purpose.
Minimal overhang for precision polishing and even pressure.
SPECIALTY BLEND OF MATERIAL
Provides an amazing finishing ability resulting in a haze free luster.
Foam provides greater durability and is optimized for user experience.
Recommended Tools: DA
Cruz Night is an easy on - easy off polish that creates amazing depth and leaves the paint slick and glossy.
The sprayer works with the spray bottle held at any angle, even completely upside down! The sprayer works in all hard to reach applications. Ideal for auto detailing applications. Allows you to completely empty a spray bottle. No more residual liquid left in the bottom of the bottle. The ergonomic design provides superior comfort.
Bottle Not Included. This is for the sprayer only.
These waffle weave microfiber towels pick up and absorb more dust, dirt, and liquid than most cotton or disposable cleaning towels! Perfect for interior and exterior detailing and drying, these car wash towels are machine washable and reusable for over 100 uses. The fibers have multiple edges to pick up and trap debris.