|
Sold Out $ 17.95
XPEL Protection Film Cleaner is designed to extract most environmental deposits such as tar, oil, hard water stains, bug acids and other contaminants from Polyurethane paint protection films. Its a deep cleaning action restores the clear, glossy, freshly-installed appearance of the original film.
Sold Out $ 49.99
This system works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
• Lasts up to 4 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
Compare with clay bars:
|
AUTOSCRUB Pad |
Traditional Clay Bars |
Application Tool |
Hand or Orbital Polisher |
Hand |
Durability |
50~80 times |
10~15 times |
Washable |
Yes |
No |
Temp. Sensitivity |
Low to Medium |
Medium to High |
Use with Lubricant |
Yes |
Yes |
Overspray |
Fast to remove |
Slow to remove |
Brake Dust |
Fast to remove |
Slow to remove |
Rail Dust |
Fast to remove |
Hard to remove |
Industrial Pollution |
Fast to remove |
Slow to remove |
Reshape |
Not required |
Required |
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
NOTE: Using with 6” soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
Don’t use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Sold Out $ 12.00
Shine Mist is going to change the way you clay.
Unlike most clay lubricants on the market that only highlight “slickness”, Shine Mist focuses on “grab” as well. What this means is that when using Shine Mist, your clay bar or synthetic clay product will actually pull fall out and deposits off your paint with ease instead of just skimming over it.
Shine Mist also doubles as an excellent wax free detail spray for those finicky situations such as coating maintenance and paint sealant removal.
Sold Out $ 8.95
Have you noticed that tar, sap, grease, and other road grime is accumulating on the exterior of your vehicle? It will damage your car's finish and dull your paint if you don't remove it. It won't wash off with soap and water. Detergents can't remove it. What can you do? You need the solution preferred by professional auto detailers, dealers, and enthusiasts. You need Tarminator.
Recommended Uses:
Sold Out $ 4.95
12 Pack; 0000 Super Fine Steel Wool Pads For Final Finish, Smoothes Shellac, Lacquer, Varnish Before Final Top Coat, Buffs Furniture Wax, Rubs On A High Luster Finish, Puts A Matte Finish On Gloss Paint.
Sold Out $ 6.95
Many glass cleaners contain soaps, scents, or dyes that leave behind residues. RESIDUES CAUSE STREAKS! Invisible Glass® is tested and proven 100% residue and streak free by a leading independent laboratory.
Foaming action easily removes oily dirt, pet slobber, grease, fingerprints, smudges, smoke haze, sap, bugs, permanent marker, and grime from glass in your home, office, or vehicle.
Invisible Glass® guarantees 100% satisfaction or your money back. Call 1-800-992-5093, or mail in your sales receipt and we will replace the product or refund your money.
For streak-free glass cleaning, use clean, lint-free cloths that are free of residual detergents and fabric softeners, which can streak glass. Avoid paper towels that contain streaky wetting agents. Some pros prefer crumpled newspaper. Spray onto glass. Gently wipe the glass to lift and remove grime. The glass must be dried completely with a towel or cloth. SAFE to use on TINTED windows. To clean hard-to-reach glass, such as tall mirrors, high windows, or inside windshields, use the Invisible Glass Reach and Clean tool.
Sold Out $ 2.95
Just your every day bottle of 70% IPA.
Sold Out $ 49.99
This system works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
• Lasts up to 4 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
Compare with clay bars:
|
AUTOSCRUB Pad |
Traditional Clay Bars |
Application Tool |
Hand |
Hand |
Durability |
50~80 times |
10~15 times |
Washable |
Yes |
No |
Temp. Sensitivity |
Low to Medium |
Medium to High |
Use with Lubricant |
Yes |
Yes |
Overspray |
Fast to remove |
Slow to remove |
Brake Dust |
Fast to remove |
Slow to remove |
Rail Dust |
Fast to remove |
Hard to remove |
Industrial Pollution |
Fast to remove |
Slow to remove |
Reshape |
Not required |
Required |
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
NOTE: Using with 6” soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
Don’t use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Sold Out $ 9.99
5 3/4" Hand Strap Applicator for 6" AUTOSCRUB Pad.
Sold Out $ 12.99
Available in Fine and Medium Grade or get them both!
This system works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
• Lasts up to 2~3 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
Compare with clay bars:
|
Speedy Prep Sponge |
Traditional Clay Bars |
Application Tool |
Hand |
Hand |
Durability |
20~30 times |
10~15 times |
Washable |
Yes |
No |
Temp. Sensitivity |
Low to Medium |
Medium to High |
Use with Lubricant |
Yes |
Yes |
Overspray |
Fast to remove |
Slow to remove |
Brake Dust |
Fast to remove |
Slow to remove |
Rail Dust |
Fast to remove |
Hard to remove |
Industrial Pollution |
Fast to remove |
Slow to remove |
Reshape |
Not required |
Required |
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
NOTE: Using with 6” soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
Don’t use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Sold Out $ 49.99
This system works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
• Lasts up to 4 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
Compare with clay bars:
|
AUTOSCRUB Pad |
Traditional Clay Bars |
Application Tool |
Hand |
Hand |
Durability |
50~80 times |
10~15 times |
Washable |
Yes |
No |
Temp. Sensitivity |
Low to Medium |
Medium to High |
Use with Lubricant |
Yes |
Yes |
Overspray |
Fast to remove |
Slow to remove |
Brake Dust |
Fast to remove |
Slow to remove |
Rail Dust |
Fast to remove |
Hard to remove |
Industrial Pollution |
Fast to remove |
Slow to remove |
Reshape |
Not required |
Required |
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
NOTE: Using with 6” soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
Don’t use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Sold Out $ 22.95
This is our house clay we use daily in our shop. The clay depending on what grade originates from Europe or Japan. It does a great job without sticking. We have tested it all and this is what we found works best. We use Optimum No Rinse or Shine Supply Shine Mist as our clay lube. Comes with a nice container so you can save the used clay safely for the next use.
Sold Out $ 12.00
Throw Back is specifically designed to completely remove polishing oils and fillers for accurate paint examination and surface preparation prior to adding your final layer of protection.
Before applying any type of sealant or coating, a contaminant free surface is crucial to ensure a strong bond.
An IPA (isopropyl alcohol) and water mixture has been the typical product used to remove polish residue and fillers but now it’s obsolete. An IPA wipe down only loosens the oils and a problem occurs as oil can be spread around or reintroduced as you wipe the surface.
Throw Back acts as a paint degreaser and breaks down polish residue and dissolves oils, making sure that all contaminants are eliminated instead of being pushed around.
Sold Out $ 15.00
Smooth Move is the best way to decontaminate seen and unseen iron particles from any vehicle surface. The specially formulated chemical ingredients are both acid-free and pH balanced, making it safe for the paint, without the fear of deterioration and damage. Iron particles will turn red on contact and dissolve from the paint before your eyes! Remove the iron to expose the smoothest surface possible with Smooth Move!
Mix the following dilution in your foam cannon bottle:
Wash and rinse the surface prior to applying Smooth Move. Shake well and spray product onto the surfaces you wish to decontaminate, wait 2-3 minutes while contaminants change color to a purple-red. Rub surface with a damp wash mitt or soft microfiber towel. Rinse well with water.
Shop for Detail Supplies @ Detail Arsenal
Our online detail supply store is moving! While you can still shop on Autoskinz our new store detailarsenal.com has it all! Earn rewards by signing up for an account! Same people just under our new brand! Our services will remain here @autoskinz.