Click to shop with us at the all new Our new site for Premium Detail Supplies!


NANOSKIN AUTOSCRUB Wash Mitt 6" x 8.7"


  • This system works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

    • Lasts up to 4 times longer than clay bars
    • For a flawless “show room perfect” shine
    • Glides on & off easily for a slick finish
    • If inadvertently dropped on shop floor, simply rinse clean   

    There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.


     Compare with clay bars:



    Traditional Clay Bars

    Application Tool




    50~80 times

    10~15 times




    Temp. Sensitivity

    Low to Medium

    Medium to High

    Use with Lubricant




    Fast to remove

    Slow to remove

    Brake Dust

    Fast to remove

    Slow to remove

    Rail Dust

    Fast to remove

    Hard to remove

    Industrial Pollution

    Fast to remove

    Slow to remove


    Not required




  • Directions:

    Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.

    1. Thoroughly wash vehicle free of dust, sand, and dirt.
    2. Use lubricate such as Shine Mist, Optimum No Rinse, Glide, etc. 
    3. Spray sufficient lubricate onto the surface evenly.
    4. Polish the surface with dual action orbital polisher or by hand using the velcro strap (sold seperately) using light pressure (Low Speed).
    5. Wipe off residue with clean dry microfiber towel.

    NOTE: Using with 6” soft-edge DA pad is highly recommended.

    Sufficient lubrication is crucial to the AUTOSCRUB application.

          Plain water is NOT an adequate lubricant.

          DO NOT use with rotary polisher.

          AUTOSCRUB is not solvent resistant.

          Remove tar & grease before application


    Helpful Tips:

    The AUTOSCRUB has a protective coating to ensure stability within transportation.

    To break in the pad, moisten the AUTOSCRUB with desired lubricant.

    Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.

    Don’t use until the polymerized rubber is soft and slightly tacky.

    Cold temperatures may stiffen pad. Warm surface before using.

Related Items

Shop for Detail Supplies @ Detail Arsenal

 Our online detail supply store is moving! While you can still shop on Autoskinz our new store has it all! Earn rewards by signing up for an account! Same people just under our new brand! Our services will remain here @autoskinz.