Leather Conditioner | Soften & Protect
$ 16.00
-
FEED YOUR LEATHER.
Replenish your leather with a product that will truly soften and condition it.
Leather Conditioner is fortified with real lanolin and bees wax. These are the absolute best ingredients to properly condition and extend the life of your leather. Just a few treatments a year can add years of health to your seats.
If you neglect your leather, it’s more likely to fade, stain, and develop cracks. Like any other part of your vehicle, your leather needs to be properly taken care of or it will begin to show signs of wear and fatigue. Leather Conditioner makes it easy to keep your seats looking and feeling new.
Fall in love with your leather all over again!
-
Directions:
Always clean your leather with a leather cleaner or mild all-purpose cleaner before conditioning. Shake well. Pour a small amount on to a clean towel or applicator. Thoroughly work the product into leather. Remove any excess with a clean towel. Very dry or neglected leather may need multiple treatments.
Customer Reviews
Related Items
Punch It | Silica Spray
$ 22.00
-
KO...EVERYTHING.
What is synergy?
Synergy = the interaction of two or more substances to produce a combined effect greater than the sum of their separate effects.
What makes Punch-It different from a detail spray?
We’ve taken unique synthetic materials and blended them with silica to make the ultimate detail spray. Punch-it adds protection and creates an extremely hydrophobic, slick, self-cleaning surface which keeps your ride cleaner, longer. Works awesome on all exterior surfaces so there’s no limit to what you can knock out with this product.
Product Highlights:
- Protects surface and boosts performance of existing protection
- Keeps your vehicle, boat, motor home and much more...CLEANER, LONGER.
- Leaves surface slick and extremely hydrophobic
-
Directions:
How do you use Punch-It?
Shake well. Spray directly onto surface and spread product evenly. Flip the towel and wipe again using medium down pressure and slow arm speed. This method eliminates any streaks. If the surface is hot, spray directly onto a microfiber towel and wipe surface. Flip towel and wipe again using medium down pressure and slow arm speed.
Pro Tip:
For best results use with plush, high GSM microfiber towels like the Rag Company's Eagle Edgeless 600FAQ's
Q - What is the proper use of Punch-It?A- Punch-It can be used as a stand alone light protection for any exterior surface OR it can be applied to boost the existing protection of any of our waxes or sealants.Q - Can Punch-It be used on ceramic coated surfaces?A - Yes, Punch-It will act like a light version of our Clutch silica spray when applied on top of ceramic coating. It will quickly add slickness and increase the hydrophobic properties of the ceramic coating.Q - Why does it cost more than a typical detail spray?A - The cost is due to the amount of silica and inorganic chemistry used in this unique blend. These materials are more expensive than raw materials that make up traditional detail sprays.Q - Why would I use this over regular detail spray?
A - Punch-It is MORE hydrophobic, slicker and WILL NOT break down with heat and surface temperature. It also doesn't attract dust which keeps your vehicle cleaner, longer.
Shine Mist | Clay & Polishing Lube
$ 11.00
-
GIVE YOUR CLAY SOME LOVE.
Shine Mist is going to change the way you clay.
Unlike most clay lubricants on the market that only highlight “slickness”, Shine Mist focuses on “grab” as well. What this means is that when using Shine Mist, your clay bar or synthetic clay product will actually pull fall out and deposits off your paint with ease instead of just skimming over it.
Shine Mist also doubles as an excellent wax free detail spray for those finicky situations such as coating maintenance and paint sealant removal.
-
Directions:
Shake well. Spray product directly onto the surface and immediately begin the claying process. Make sure there is always enough Shine Mist in the panel to glide your clay bar effortlessly across the surface. Wipe dry with a soft microfiber towel when area is complete.
Pro Tips:
For use when cycling any of our compounds; spray. Shine Mist directly on panel towards the end of your polishing cycle. This method extends the cycle time of the compound and in many cases gives a better finish.
Ride Shine | Quick Detail Spray
$ 13.00
-
SHINE YOUR RIDE.
IT HAS NEVER BEEN EASIER TO ADD A DEEP LUSTROUS SHINE TO YOUR RIDE.
Give your paint, plastics, and chrome a quick wipe down and you will instantly fall in love with Ride Shine. It contains a true carnauba wax aimed at rejuvenating the existing protection on your paint and reintroducing that freshly waxed look. The unique “easy-wipe” formula will give you a streak free finish every time; even in direct sunlight!
-
Directions:
Shake well. Spray directly onto surface and gently wipe with a soft microfiber towel. Flip towel to a dry side and wipe until desired gloss is achieved.
Pro Tip:
Use Ride Shine on your matte paint or vinyl wrap to keep it looking fresh. -
Beadlock | Ceramic Coating
$ 120.00
-
YOUR WHEELS AND SUSPENSION TAKE THE MOST ABUSE.
PROTECT THEM.
How does it work?
BEADLOCK creates a hard sacrificial barrier on your wheels and suspension which shields the abuse coming from brake dust, dirt and UV rays.
BEADLOCK contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass strength and hardness, but unlike glass we have blended in a proprietary formulation of elastic polymers, which allow the microscopic surface to flex. With this blended SiO2 chemistry BEADLOCK provides a far more durable and hydrophobic layer than any wax or sealant because it cures as a hardened layer of protection while maintaining the ability to absorb impacts and flex with the surface it's applied to.
This easy-to-apply coating is specifically designed to protect your wheels and suspension components from the unique conditions they see both on and off-road. Whether you simply cruise the pavement or get down in the dirt BEADLOCK coating can take the abuse. Safe for all finishes including raw metals, chrome, powder coat, anodized and painted surfaces.
Method wheel coated with BEADLOCK
Radius Arm coated with BEADLOCK
Kit Includes:
- (1) 80 ml Beadlock bottle
- (1) 4 oz Throwback prep cleaner
- (1) 4 oz Punch-It after care maintenance
- (1) coating applicator pad
- (1) coating leveling microfiber towel
- (2) black coating sprayers (one spare sprayer)
- (1) pair blue gloves
- Complete instructions and pro tips insert card
Maintenance:
After BEADLOCK has been applied to the surface there's really no need to use our Cool Guy wheel cleaner unless you have neglected the wheel for a few weeks and the brake dust has built up. Make up a bucket of our SHIFT soap and water to clean the coated surfaces. Always use a soft wash mitt to ensure safe cleaning.
After each cleaning, apply PUNCH-IT synergy spray to maintain the layer of BEADLOCK. This keep the coated surface slick and hydrophobic.
-
Directions:
Clean the surface thoroughly with Throw Back paint cleanser. Shake BEADLOCK well. Spray directly on the surface you want to protect OR you can spray directly onto the applicator pad. Spread product using the coating applicator pad. Product will begin to "rainbow" within seconds. Give it 45-60 seconds to set up and remove using a clean microfiber towel. Use an additional towel or flip the included towel inside out to ensure product is even on the surface.
Pro Tip:- To avoid any chance of overspray on your rotors OR unwanted areas cover with a towel to prevent product from making contact.
- The 80 ml bottle will coat approximately 3-4 sets of wheels depending on wheel size.
.
-
