Burn Out | Shine Supply

Shine Supply

Size
  • NO ONE HAS TIME TO BURN.

    With over 20 years in the mobile detailing industry, we understand the needs of mobile detailers.  You fight the elements, price battles and time restraints while still trying to deliver quality results.  You need a product that provides true correction, works in the sun and provides results that can be seen for months - not just one or two washes.  Burn Out reconditioning cream is your ultimate one step liquid solution. Removes defects, creates high gloss, and leaves the surface primed with a layer of Sio2 protection. Formulated with our unique diminishing abrasives, Burn Out gives you true correction while keeping you on schedule for your next job.

     

       


    • Directions: Apply four dime size dots of product to pad of choice depending on desired results. Work sections at a time using overlapping passes until desired results are achieved, the sections you work the more correction you will get. After applying to 2-3 full panels remove product with a soft microfiber towel. This allows the Sio2 to "set-up" and primes the surface for your top layer of protection. If you're working in direct sun - wipe off after one panel. Use discretion with your wipe-off time frame according to the climate you're in. 


      Pro Tips: 
      • Using with microfiber pads will give you more cut/less clarity. Foam pads will give you less cut/more clarity.
      • This product is designed specifically for one step polish jobs.  If you are going for FULL paint correction, use one of our pure compounds (Chop Top, Flat Top or Classic Cut) and make sure you have priced the job properly for the time you will spend performing the work.
      • Always follow with Daddy-O paint sealant (12 month protection), Cherry Silica Wax topped with Clutch silica spray(12 month protection) OR you can simply top with our Clutch Silica Spray (6 month protection) for fast results! 

      Highlights:

      • ZERO dust without being oily
      • Effortless wipe-off
      • Fortified with SiO2 protection
      • Cut level equivalent to our Classic Cut
      • Formulated with diminishing abrasives 

       

      Our pads of choice:

      • HDO Blue Foam Pad  
      • HDO Orange Foam Pad 

      Which pad should you choose?

       BLUE - This pad is for harder paints and will give you maximum defect removal for a one-step polish job. The foam is stiffer than the orange pad (which is why it cuts more) but still contours nicely to the vehicles surface. 

      ORANGE - This pad is for softer paints. It will give you good swirl reduction and enhance gloss while being very user friendly. 


    •  

    Customer Reviews

    Based on 1 review Write a review

    Related Items