Beadlock Pro 100ml | Ceramic Coating
$ 185.00
-
LIFE INSURANCE FOR YOUR PAINT.
Beadlock Pro ceramic paint coating creates a hard-sacrificial barrier which shields your paint from the abuse coming from the sun and other harsh elements.
How does it work? Beadlock Pro contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass its strength and hardness. This integrated SiO2 technology makes this product far more durable and hydrophobic than any wax or sealant.
This easy-to-apply coating is specifically designed to protect your paint from the unique conditions it sees both on and off-road. Whether you simply cruise the pavement or get down in the dirt Beadlock Pro ceramic paint coating can take the abuse.
Product may be used on single-stage paint, gel coat, and clear coated paint surfaces.
Also available in a 30ml kit.
Purchase a Beadlock Pro sticker for your car door here!
Kit Includes:
- (1) Glass 100ml bottle of Beadlock Pro
- (1) Ceramic Coating Applicator Pad
MAINTENANCE TIPS!
How you wash your vehicle is the most important part of maintaining your ceramic coating. We have created a diagram along with a maintenance schedule to keep your coating looking it's best!
Coating Specs:
- Hardness: >9H
- pH resistance: 2-13
- Durability: up to 4 years
- Thickness: single layer 2-3 microns
- Contact angle: 108°
-
Directions:
Prep: Decontaminate the paint surface using Smooth Move paint decontaminater followed by claying the surface with a clay bar and Shine Mist clay lube. Polish the paint to reduce any surface defects and create maximum gloss. Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Apply: Shake Beadlock Pro well. Apply directly onto the applicator pad and spread product evenly onto the surface. Product will have an “oil slick/rainbow” look to it as it begins to dry. This effect should begin within seconds. Give it 45-60 seconds to set up and then remove using a clean microfiber towel. Using an additional towel, lightly wipe over the area again to ensure product is even and level on the surface. Once you have wiped with the second towel the coating will begin to “set-up”. Do not go back into an area minutes later and re-wipe or you could cause streaking.
Proper washing method found here
Ceramic coating maintenance schedule found here
How do you know it’s ready to be removed? Perform a test spot with your microfiber towel. The coating will have some slight resistance when you wipe. This slight resistance lets you know it’s ready for removal. If you have difficulty removing the product, you waited too long.
Pro Tips:
- Applying in colder conditions will give you a longer time frame before wipe-off. Applying in hotter conditions will give you a shorter time frame before you wipe-off.
- Our Slick Back primer polish will usually remove any product that was left on the paint too long.
Customer Reviews
Related Items
Wise Guy | Tire Cleaner
$ 30.00
-
GET THEM TIRES CLEAN.
A clean tire is a healthy tire.
Wise Guy is designed to make cleaning, even the dirtiest tires, as effortless as possible. In the matter of seconds, you can easily strip stubborn stuck-on oils and debris from your tires leaving them clean and ready to be dressed.
When a tire is not properly cleaned, many things can start going wrong..
- Horrible looking & stained
- Rubber pores become clogged with contaminants
- Rejects tire dressing and conditioning products
- Sidewalls can become rigid and dry
- Dry neglected sidewalls can begin to crack deteriorate
- Life of the tire is shortened
Proper cleansing of your tires is just as crucial as your paint and wheels. Anything that goes untouched and neglected for that matter will suffer.
Wise Guy is also a great inner-fender cleaner. Simply spray on your inner plastic guards and suspension components to begin eating away layers of soil and grime.
WARNING: Wise Guy will etch high polished (raw) aluminum wheels if sprayed on them or let run onto them.
-
Directions:
Dilute 2:1 with water in a spray bottle. Spray directly onto surface and let dwell for 60 seconds. Agitate with a tire brush to ensure all grime is removed. Rinse with pressurized water.
Pro Tips:
WISE GUY loves to hang out with COOL GUY wheel cleaner so pair these guys up for some nice, clean wheels and tires.
Decked Out | Tire Dressing
$ 20.00
-
CREATE THE LOOK YOU WANT.
Whether you prefer a high gloss or satin finish, Decked Outis a concentrated dressing aimed at giving your tires and fender wells the look of perfection. Its water based formula acts as a conditioner for your tires and inner-fender plastics instead of just coating them in a shiny goop.
Once your tires have soaked in Decked Out, they will be dry to the touch and non-greasy. You no longer have to worry about "flinging" tire dressing down the side of your car or truck after conditioning your tires. All of the shine and color is locked into the rubber, not just sitting on top.
Dilute with water to create your desired look.
Dilution ratios:
1:1 = High gloss
2:1 = Satin Finish
Use regularly to protect your tires and always maintain that "Decked Out" look!
***DOES NOT INCLUDE SPRAYER***
-
Directions:
Dilute to your liking and shake well. Spray Decked Out on to your applicator and generously apply to your tires. Let the product soak into your tires. After a few minutes, you may need to take your applicator and quickly wipe the tires a second time to even out any blotching or spotting. Once Decked Out is dry, you can come back with a towel and remove any residue that your tires did not soak in. This step will vary depending on the amount of product used and the condition of your tires.If your tires are extremely dry, you have oversized tires, or would like a very high gloss, you can spray Decked Outonto your tires instead of wiping it on. This will introduce more product to the surface easier and quicker.
Punch It | Silica Spray
$ 22.00
-
KO...EVERYTHING.
What is synergy?
Synergy = the interaction of two or more substances to produce a combined effect greater than the sum of their separate effects.
What makes Punch-It different from a detail spray?
We’ve taken unique synthetic materials and blended them with silica to make the ultimate detail spray. Punch-it adds protection and creates an extremely hydrophobic, slick, self-cleaning surface which keeps your ride cleaner, longer. Works awesome on all exterior surfaces so there’s no limit to what you can knock out with this product.
Product Highlights:
- Protects surface and boosts performance of existing protection
- Keeps your vehicle, boat, motor home and much more...CLEANER, LONGER.
- Leaves surface slick and extremely hydrophobic
-
Directions:
How do you use Punch-It?
Shake well. Spray directly onto surface and spread product evenly. Flip the towel and wipe again using medium down pressure and slow arm speed. This method eliminates any streaks. If the surface is hot, spray directly onto a microfiber towel and wipe surface. Flip towel and wipe again using medium down pressure and slow arm speed.
Pro Tip:
For best results use with plush, high GSM microfiber towels like the Rag Company's Eagle Edgeless 600FAQ's
Q - What is the proper use of Punch-It?A- Punch-It can be used as a stand alone light protection for any exterior surface OR it can be applied to boost the existing protection of any of our waxes or sealants.Q - Can Punch-It be used on ceramic coated surfaces?A - Yes, Punch-It will act like a light version of our Clutch silica spray when applied on top of ceramic coating. It will quickly add slickness and increase the hydrophobic properties of the ceramic coating.Q - Why does it cost more than a typical detail spray?A - The cost is due to the amount of silica and inorganic chemistry used in this unique blend. These materials are more expensive than raw materials that make up traditional detail sprays.Q - Why would I use this over regular detail spray?
A - Punch-It is MORE hydrophobic, slicker and WILL NOT break down with heat and surface temperature. It also doesn't attract dust which keeps your vehicle cleaner, longer.
Solution | Multi-Purpose Cleaner
$ 14.00
-
SIMPLIFY YOUR CLEANING.
Solution is an advanced multi-purpose cleanser that will clean anything it touches. Its pH balanced formula delivers safe and effective results on nearly any surface. Solution can do this because it works by emulsification. This means that instead of “burning” off grime, which is ineffective and unsafe, it actually “loosens” the soiled area ensuring successful results.
Solution is safe and effective on:
- leather
- vinyl
- plastics
- tires
- wheels
- undercarriage
- engines
- paint
AND MUCH MORE
-
Directions:
It’s all how you dilute it..
Dilute 10:1 for light interior cleaning and exterior paint prep.
Dilute 4:1 for heavy cleaning on leather, vinyl, and plastics.
Dilute 2:1 for wheel, tire, and undercarriage cleaning
Dilute 1:1 for heavy duty cleansing
Pro Tip:
Because Solution works by emulsification, it works best when it is allowed to soak into the treated area. Grime will not be immediately loosened on contact, however it only takes a minute!
